|
|
12 VOLT ACCESSORIES |
|
|
|
| |
| |
Waterproof USB Port. |
|
2.0 amp, 12volt, dual port USB. Can be recessed in the dashboard, or clamped to a tent pole or motorcycle handlebar.
Powerful enough to run an iPhone or iPad.
Cost: Vehicle USB $35.95
Cost: Motorcycle USB $39.95
|
| |
|
| |
A/T Accessory Socket Box & Locking Plug |
 |
Frustrated by flimsy 12 Volt sockets down at the local auto parts store? Do you find your GPS and other accessories coming unplugged on the washboard? Need to surface mount a socket but can’t find a solution? WE HAVE IT! Our Socket Box is made from galvanized steel, with an inspection cover. It comes with a marine grade socket, fuse holder and 15 amp fuse.
Accessory Box, including Locking Socket, Fuse holder & fuse $ 21.95
Marine Locking Socket $11.49
Marine Locking Plug $8.04
|
| |
|
| |
Marine Grade Battery Chargers |
|
Components are completely sealed in durable, corrosion-proof, waterproof thermal potting compound.
Full 3-stage charging for fast, full charging and maintenance.
Potted components are fully impact protected.
Shockproof and vibration-proof.
Built-in electronic overload protection, with automatic reset.
Reverse polarity and ignition protected.
LEDs indicate state of charge.
"Smart" technology can be left on without harmful effects to battery.
All models may be used for storage/maintenance.
Thermal protection for extreme ambient temperatures.
Models for 12, 24 or 36 volt systems.
For flooded or gel cell batteries
2 year limited warranty
10-amp output, Single Battery Charger.
12V system, 8-10 hours recovery time
Full-time maintenance function
Waterproof, fully-encapsulated electronics
Lifetime warranty against internal water damage
Cost: $135.00
20-amp output, Double Battery Charger (10/10)
High performance charger for 12 or 24 volt systems
20-amp output
5 hour recovery time
Full-time maintenance function
Waterproof, fully-encapsulated electronics
Lifetime warranty against internal water damage
Cost: $240.00
| |
| |
|
| |
Portable Power Pack |
 |
The National Luna Portable Power Pack is a removable, compact battery box with built-in split-charge isolator, ideal for modern vehicles that cannot accommodate a second battery in the engine compartment. The design of the Portable Power Pack allows it to be used as a standby power pack for 12-volt appliances.
The Portable Power Pack features fused accessory plugs, a polarized high-power plug and built-in battery monitor with low-battery and over-charge warnings. The built-in plugs can be used for low-power accessories such as refrigerators, pumps, compressors, lights and other 12-volt electronic devices. The high-current input-output can be used for higher power requirements such as invertors or battery chargers. The built-in split-charge isolator is fully automatic and does not require
additional hardware in the application vehicle.
OPTION: The Dual Battery Controller Plugs into port provided in the portable power pack. Mounts on dash board or other accessible location to show charge and storage status plus allow over-ride if Aux battery is needed for starting purposes. Sold separately.
FEATURES:
Simple installation
Removable / Portable design
Fully automatic split-charge isolator
Built-in battery monitor and input voltage monitor
Remote battery monitor port
Slide-lock lid
Bolt-down / Strap-down design
Electronics isolated from battery compartment
Can accommodate standard automotive battery types
23' of heavy-duty cable supplied with attached coupler (Red Anderson style)
Fuse-protected plugs and connections
Battery hold-down bracket supplied In-line fuse supplied
Additional battery terminals and hardware supplied
Additional cables, hardware and monitors available separately
3 year comprehensive warranty
SPECIFICATIONS:
Physical size 20"L x 10.25"W x 12"H
Battery Compartment 13.75"L x 7"W x 10.5"
Weight 12 lbs (excluding battery and cables)
Power supply 8V-15V (display range: 11.4V -14.2V)
Switched current 85 amp (continuous) , 400 amp (peak)
Cable 23' red and black (46' total) with connector
Connectors "Hella" style output (15A fused)
"Cigarette lighter" output (15A fused)
50 amp input-output coupler (60A fused) Anderson style
50 amp charge input (split-charge input) Anderson style
Remote port Suits removable data cable for Dual Battery
Controller
Battery monitors Built-in to power pack
14-stage auxiliary battery monitor ( 11.4V -14.2V)
7-stage input voltage monitor (12.6V -14.2V)
Power consumption 60mA ave (standby), 780mA max (solenoid engaged)
Shipping Dims 20"L x11"W x 13"H
Cost: $520.00
|
| |
|
| |
NL Split Charging Kit |
 |
The Split-charge kit will monitor the state of your batteries and the charging source. Connection is automatic, so you don't have to remember to connect your auxiliary battery while driving.
The Split-charge controller will automatically isolate the auxiliary battery when the batteries are no longer receiving a charge voltage.
The Split-charge kit consists of: Intelligent solenoid, Dual battery monitor, plug-in monitor cable, 19.7 ft each 6 gauge black and red double insulated cable, in-line power fuses, battery terminals, screws, lugs, cable ties and full installation guide.
This kit has everything you need for a D-I-Y split charge installation. Batteries are not included
Cost: $375.00
|
| |
|
|
|
