accessories |
|
| |
|
| |
|
| |
Rear Stabilizer |
 |
This device slips under the rear of the trailer. After ratcheting the trapezoid into position the rear of the trailer is stabilized. An excellent safety device for use when the trailer is unhitched from the tow vehicle.
The Rear Stabilizer is $79.00
top of page |
| |
|
| |
Tent Cooler |
 |
This is the answer if you want the coolest air from an evaporative system for your tent , and you will appreciate the small versatile size of the unit. Using powerful Twin Brushless Double Ball Bearing Motors this Model provides streaming cool crisp air where & when you need it. The Twin Motors have the capacity to produce over 220 cubic feet per minute (cfm) at a velocity of 3,000 feet per minute with a noise level of 59 dBA on high speed.
The Swampy MW-1 Tent Cooler is $284.00
top of page
|
| |
|
| |
SILENT HITCH PIN |
|
This hitch pin takes out all the movement between the receiver tube and the coupler. This eliminated any noise and stops the pin from elongating the hole in the receiver.
Features:
- Works with all 2" receiver hitch tubes (Class III/IV, and 2" size Class II).
- Keeps hollow ball mounts and other hollow tow devices secure and rattle-free by removing distracting noise and wear-and-tear of tow devices from vibration.
- Attractive barrel lock with two keys for security.
- Cannot be used with solid steel ball mounts or any accessory device that is not hollow.
Specifications:
- Chrome coated, heavy-duty pin
- Heavy-duty spring nut with counter boring
- Rubber dust cap for weather-proofing of lock.
- Supports up to Class IV tow rating of up to 10,000 lbs gross trailer weight and 1,000-1,200 lbs tongue weight.
Cost: $28.69
top of page |
| |
|
| |
Tent Mounting Assembly |
|
Install and remove your roof top tent easily with our mounting system. The hardware slides into the tents mounting extrusion and clamps to the roof rack cross bar.
The hardware consists of Two 1 7/8” x 1 3/8” x 10 gauge electroplated steel plates, two 1/4 x 20 x 1.75 carriage bolts, and 2 nylock nuts. You need two sets per roof rack cross bar.
Cost: $3.75
top of page |
| |
|
| |
SHOWERS AND ENCLOSURES |
 |
Extreme Series Water Heater
Featuring stainless steel construction for extra durability and hand pump operation for self-contained use. A truly self-contained portable hot shower. Includes water temperature indicator and showerhead with on/off control for extra convenience. Great for camping & hunting.
3 Gallons.
Features:
- Heats to over 100º F in about 5 minutes
- Handy thermometer displays water temperature
- 1 piece hand pump pressurizes system without batteries
- 6 foot shower hose with on/off control showerhead for extra convenience
- No need to hoist - sealed hand pump pressures system in seconds
- Completely self-contained! Enjoy hot showers anytime, anywhere
- Simple to use - just fill with water and place on rugged stove
- High quality stainless steel construction will never rust
The Zodi Hotman Extreme Shower
with the stove is $139.95
In stock.
top of page
|
| |
PRIVACY ENCLOSURES |
 |
The Tepee, the camping industry's first fully equipped portable outhouse by Paha Que', provides a "common sense" evolution in campsite restroom and shower facilities. Featuring 67" vertical walls, floor measurements of 54" x 54", and a peak that reaches 94". The Tepee is lightweight, portable, and easily stows in a 8" x 26" zippered carry bag that weighs about 10 pounds. Easy to follow instructions sewn inside the carry bag promise a five minute one-person setup
THE TEPEE OUTHOUSE SPECIFICATIONS
Measurements:
Floor Size: 54" x 54", removable
Size at Height of 5'6": 36" x 36"
Inside height: 94" at peak
Zipper Door Dimensions: 57" high x 32" wide, 8" off ground 4"
Wide Netting Strip at Wall Bottom, Except Door
Wall Netting From 5'8" to Top; Four 104" Poles, Main Vertical; Four 48" Poles, Top Horizontal
Materials:
Sidewall fabric: 150D polyester oxford weave, with heavy-duty polyurethane waterproofing
Floor Fabric: 100% high-tenacity nylon, 6.5 oz. 210 denier oxford with heavy-duty polyurethane waterproofing
Poles: Fiberglass or Aluminum alloy with shock-corded pole sections
Outside Pole Diameter: 0.5"
Roof and Wall Mesh: Rugged 2.3 oz. poly filament 75 denier polyester knit, "no-see-um" roof
Zippers: YKK brand nylon coil with corrosion-resistant nickel plated sliders
Special features:
"No-see-um" mesh roofing and bottom side panels were added to enhance ventilation
The detachable heavy-duty, waterproof flooring engineered to allow drainage of shower run off and to keep the bugs out
Rain fly includes unique clear vinyl panels, that warm the shower bag (not included) when rotated to face the sun
Stows in duffel style carry bag with straps, 8" in diameter and 26" long
Easy one person set up in under 5 minutes
Privacy Enclosure $199.00
Out of stock for 2009
top of page
|
| |
|
| |
Cook Partner Portable Stove |
 |
This heavy duty outfitter stove is designed and tested for the harsh environments experienced by the adventure traveler. Sturdy aluminum sheet is seam welded by craftsman to form the stoves case and lid. A large handle and locking latch keeps the lid in place and allows for easy transport.
All cooking surfaces are stainless steel and clean easily, while providing a long service life and no rust. The Cook Partner is one of the finest stoves available to the outdoorsman today.
The stove is an option for the Adventure Trailers Chaser along with the Stove Shelf mount or can be used stand alone as a high quality camp stove. The same stove without the windscreen is used in the Horizon Kitchen galley option.
Specifications:
Width: 18”
Length: 12”
Height: 3 ¾” (closed)
Aluminum: .080”
Burner Output: 15,000 BTU
Note: To help you with your trip planning, 1 lb of Propane yields 15,000 BTUs.
Price $269.00
top of page
|
| |
|
| |
Kitchen Shelf |
 |
The shelf is made from 1/2" Baltic Birch, the edges are routered and the corners rounded, it is finished with polyurethane. The shelf locks in place between the fender and the flare of the box, with the help of two location pins.
20" W X 50"L X 1/2"D.
Cost: $80.00
top of page
|
| |
|
| |
Water Tank |
 |
19 gallon roto molded tank with a clean out, drain plug, and mechanical water pump. Constructed from polyethylene they will not impart any taste or residue. The tanks are UV stabilized and will not breakdown under harsh outdoor weather conditions, and will not rust, chip, peel, or corrode. The black opaque color helps prevent water borne algae growth.
Dimensions: 35” L X 7.75” W X 19.25 H
Cost: $445.00
AT also makes custom water tanks in a variety of sizes and with a various fittings. More information here.
top of page
|
| |
|
| |
Stainless Steel Sink Unit |
|
We found a small fabricating company who could make high quality stainless steel sinks for us. The design, fit, finish, and materials are A+.
Tired of that muddy mess below your AT trailer water spigot after washing your hands or dishes? Then we have the solution for you!
Sink System Features:
- Deluxe stainless steel sink designed to fit both Chaser & Horizon model trailers.
- All the design features and quality construction you have come to expect from Adventure Trailers.
- Designed to fit Chaser and Horizon models.
- Easy on / easy off attachment design.
- Stainless steel & solid brass mounting hardware.
- Deluxe recessed low profile marine grade drain.
- Attached drain plug stopper.
- 3’ of heavy duty drain hose included.
- Complete with mounting instructions and all mounting hardware.
- Stores in the Horizon side-box or Chaser when not in use.
Stainless Steel Sink: Cost: $275.00
(Includes all mounting hardware).
|
| |
| |
|
| |
|
| |
|
