ACCESSORIES: TOOLS
|
| |
|
| |
|
|
|
| |
| |
Combo Shovel |
|
Need a short shovel for snow or sand and a long handle shovel when you get high centered? We now offer a "two in one" high quality shovel.
The Combo Shovel consists of a heat treated steel blade, multi-core, steel reinforced fiberglass handle, heavy duty "D" handle and steel joining sleeves.
Technical Specifications:
Long Handle Shovel Length 56.35" - (1430mm)
D Handle Shovel Length 38" - (970mm)
Blade Width 7.6" - (193mm)
Minimum "break down" Length 32.25" - (770mm)
Bag size 32.5" L x 9.5" W - (825mm x 241mm)
Combo Shovel $129.00
|
| |
|
| |
Rear Stabilizer |
 |
This device slips under the rear of the trailer. After ratcheting the trapezoid into position the rear of the trailer is stabilized. An excellent safety device for use when the trailer is unhitched from the tow vehicle.
The Rear Stabilizer is Cost: $79.00
|
| |
|
| |
Trasharoo |
|
Looking for somewhere to store your trash when your on the trail? Look no further than the Trasharoo. It is made from high quality Denier, and big enough to hold a 30 gallon trash bag. The product is well designed and built to last.
The Trasharoo attaches to your spare tire,and keeps all the smells and messes outside the vehicle. It's big enough and strong enough so you can Pack-in-Pack-out, and still have room to pick litter off the trail.
If your not using it for trash it's a great place to store wetsuits, waders, firewood, recover gear, or anything that's dirty or wet.
The Trasharoo is $49.99
|
| |
|
| |
Silent Hitch Pin |
|
Removes all the movement between the receiver tube and the coupler, it eliminates any noise, and stops the pin from elongating the hole in the receiver.
Features:
- Works with all 2" receiver hitch tubes (Class III/IV, and 2" size Class II).
- Keeps hollow ball mounts and other hollow tow devices secure and rattle-free by removing distracting noise and wear-and-tear of tow devices from vibration.
- Attractive barrel lock with two keys for security.
- Cannot be used with solid steel ball mounts or any accessory device that is not hollow.
Specifications:
- Chrome coated, heavy-duty pin
- Heavy-duty spring nut with counter boring
- Rubber dust cap for weather-proofing of lock.
- Supports up to Class IV tow rating of up to 10,000 lbs gross trailer weight and 1,000-1,200 lbs tongue weight.
Cost: $28.69
|
| |
|
| |
Tent Mounting Assembly |
|
Install and remove your roof top tent easily with our mounting system. The hardware slides into the tents mounting extrusion and clamps to the roof rack cross bar.
The hardware consists of Two 1 7/8” x 1 3/8” x 10 gauge electroplated steel plates, two 1/4 x 20 x 1.75 carriage bolts, and 2 nylock nuts. You need two sets per roof rack cross bar.
Cost: $3.75
|
| |
|
 |
HI-LIFT JACK BASE PLATE
For use under Hi-Lift jack in mud or thick sand. Raised middle section to stop jack slipping. Black powder coated steel. Flat for easy storage.
Cost: $26.00
|
| |
|
| |
Heavy Duty Swing Away Tire Carrier |
|
For those of you looking at carrying as spare tire we have our swing away carrier. A bolt on application for either the Chaser or Horizon trailers.
Easy application and can be fitted using hand tools.
The carrier hugs the body providing a low profile appearance.
The plate for the tire is predrilled for common bolt patterns, and can be custom drilled to your needs.
The carrier is designed to fit trailers with a 40" wide box, and can be adapted to your trailer, please contact us for details.
Cost: $772.00
|
| |
|
| |
Wheel Chocks |
|
If you are changing a tire, winching, doing an form of recovery, or just don't want to roll anywhere these wheel chocks are a must.
The wheel chocks conveniently fold away into a small package, open up quickly for deployment, and can lay flat for emergency traction.
Cost:
Each: $99.95
Pair: $195.00
|
| |
|
|
| |
|
