The upgrades are for the TASS Generation 1 & Generation 2 suspension systems, and the earlier Horizon's fitted with Torsion axles.

How do you know which suspension you have?

If you have air bags, you have a TASS Generation 1 or 2 suspension. If you have a Horizon, and you do not have air suspension, you have a Torsion axle. For more in depth information read the Suspension Article here.

FULL TASS SUSPENSION UPGRADE:
This upgrade reduces the amount of body roll the trailer experiences by limiting the movement using bump stops and limiting straps. It's very effective and immediately noticeable once you have them fitted.

In conjunction with the bump stops and limiting straps we recommend a retrofitting with custom valved Fox 2.0 race shocks. These shock absorbers improve the rebound and dampening compression. A bolt in cross member changes the shock position to a steeper more optimum angle.

FULL UPGRADE FOR HORIZON TRAILERS:

Fitted at the AT Facility: Cost: $1142.00

Home install Kit form: Cost: $785.58
(involves welding the limit stop tabs to the trailing arm and chassis).

FULL UPGRADE FOR CHASER TRAILERS:

This process is more involved. The existing chassis cross member has to be removed to allow for the placement of the new bolt in cross member. We only do this conversion "in house".

Full Chaser Upgrade: Cost: $1427.00

BASIC TASS Suspension Upgrade:
This upgrade reduces the amount of body roll the trailer experiences by limiting the movement using bump stops and limiting straps. It's very effective and immediately noticeable once you have them fitted.

BASIC UPGRADE FOR CHASER & HORIZON TRAILERS:
Including bump stops, limiting straps and tabs.

Fitted by AT: Cost: $308.00

Home install Kit form: Cost: $118.00
(involves welding the limit stop tabs to the trailing arm).

TORSION FLEX AXLES:
There solution to improve the performance of this axle is more complex. The axle and brackets must be removed and a new suspension system installed. We use our adjustable trailing arm suspension, and offer you the choice of air/over shocks, or coil/over shocks.

All of our Torsion Flex axle replacements are done at our facility in Upland, CA. Air suspension replacement starts out around $2000.00. Call us to discuss the details.

AT has designed the hardware to attach an awning to the side of a Chaser or military style trailer.

We use the same stainless steel awning brackets we have used for years on the Horizon trailer, and add additional hardware to mount them to the outside corners of the trailer.

To gain the height needed for head clearance we designed a double extension upright.

You have a choice of awnings, either the Fiamma F35 Pro (72” x 72”), the same one we use on the Horizon, or the Eezi Awn 2000 series 2.0 M awning (78” x 83”).
See www.adventuretrailers.com/awning.html

We’d be more than happy to schedule an appointment for you at our production facility to fit the awning, or we can send you a full kit that you can install yourself using hand tools.

Installed cost:
Utilizing the Fiamma Awning    $   839.00
Utilizing the Eezi Awn Awning $ 1057.00

Kit Cost:
Utilizing the Fiamma Awning    $ 733.00
Utilizing the Eezi Awn Awning $ 952.00

If you are running air suspension, or need a compressor to air up your tires, we carry the full line of Extreme Aire compressors.

The line starts out with the small but powerful Atom air, and goes all the way up to the fan cooled Extreme Aire compressor. We can set you up with the ideal compressor for your needs.

While you check out the compressors at www.adventuretrailers.com/tirerepair.html have a look at the tire repair tools and puncture repair kits.

Atom Aire 12 Volt Compressor (picture to left). The perfect compressor for your trailer, ARB or pneumatic locking differential compressor. Can be mounted in any position or angle.

- 10 amp motor
- .9 CFM free flow
- 150 psi max working pressure

Cost: $ 89.95

Silent Hitch Pins take out all the rattling and knocking between the trailer and tow vehicle. The tolerance differences between the receiver tube and the draw bar, or the receiver tube and the coupler, can create quite a noise.

By replacing a regular hitch pin with a locking Silent Hitch Pin all the noise and movement can be gone.

Stop the ovaling of the hole the hitch pin fits into by removing unwanted movement with a Silent Hitch Pin.

Cost: $28.69

Many of our owners have fitted these LED work lights to their trailers. We have wired them up to illuminate campsites, the kitchen, and on long extension poles to light up everything! They can be utilized as reverse lights as well as camp lights.

This second generation LED work light is impressive. It shed a very bright white light with 3000 candle power. The light is encased in a heavy duty aluminum housing with an industrial quality fitting.

Read about the specs. on them at www.adventuretrailers.com/12volt_solar.html

Cost: $120.00

We found a small fabricating company who could make high quality stainless steel sinks for us. The design, fit, finish, and materials are A+.

Tired of that muddy mess below your AT trailer water spigot after washing your hands or dishes?  Then we have the solution for you!

Sink System Features:

• Deluxe stainless steel sink designed to fit both Chaser & Horizon model trailers.
• All the design features and quality construction you have come to expect from Adventure Trailers.  
• Designed to fit Chaser and Horizon models. 
• Easy on / easy off attachment design.
• Stainless steel & solid brass mounting hardware.
• Deluxe recessed low profile marine grade drain.
• Attached drain plug stopper.
• 3’ of heavy duty drain hose included.  
• Complete with mounting instructions and all mounting hardware.
• Stores in the Horizon side-box or Chaser when not in use. 

Stainless Steel Sink: Cost: $275.00
(Includes all mounting hardware).

These shelves are a wonderful upgrade for the Chaser owner who doesn't have an add on shelf. This new version of the kitchen shelf is larger and easier to store than the original stainless steel version.

The shelf is made from 3/4" Baltic Birch, the edges are routered and the corners rounded, it is finished with a durable polyurethane. The shelf locks in place between the fender and the flare of the box, with the help of two location pins.
 20" W X 50"L X 3/4"H.

Cost: $80.00

I know many of you don't have this item, but it does two important things;

If you're up in your roof top tent, and moving around, the trailer The trailer is going to start moving beneath you. The stabilizer will solidify the trailer and stop you from feeling sea sick!

The stabilizer will also support the rear of the trailer when it's disconnected from the tow vehicle. A valuable safety device if you've got kids who like to climb all over the trailer.

This device slips under the rear of the trailer. After ratcheting the trapezoid into position the rear of the trailer is stabilized. An excellent safety device for use when the trailer is unhitched from the tow vehicle.

Cost: $79.00

Cost: $85.00

(We also do custom inlayed cutting boards for the tailgate).