AT logo 1877-661-8097
Home about Us Owner's gallery Cool Stuff Travel Dealers Contact
space
Trailers
Roof Tents
Roof Tents
Awnings
Roof Racks
Fridges
Fuel Cans - Holders
Accessories
12 Volt & Solar
tire repair
tire repair
Coupler
Heaters
Home Builder
Resource
Truck Conversions
Financing
Trailer Pricing
News & Media

roof RACKS

 
 

frontrunner

 
 
bajarack
 
Bookmark and Share
  FRONT RUNNER
  Wind Cheetah Slimline Rack Systems
   
frontrack The Wind Cheetah Slimline Roof Rack System is built to the grueling standards necessary for Expedition Travel. With decades or experience behind them, Front Runner has refined rugged durability to an art form.
   
rackfoot

The Front Runner Rack is constructed with a commitment to quality. Each rack is manufactured to stringent standards, and offer these features;

High Grade Aluminum for light weight and rigidity
* T Slot extruded floor for complete flexibility
* Heavy duty powder coating for resistance to the elements
* Lateral floor design to reduce wind noise while in motion
* Low profile perimeter to reduce drag and noise

   
racktrack The Wind Cheetah Slimline bolts effortlessly to several types of roof mounting systems. The two main options are:

* Gutter Mount Legs, Each leg is fabricated to contour to the gutter of the vehicle and bend horizontally to mount on the bottom T Slot surface of the rack.

*Track mount Legs. For vehicles designed with a gutterless system, Front Runner has designed a track that mounts on the roof and accepts specially designed legs to solidly bridge the gap from roof to rack.

We stock Front Runner Racks for the following vehicles:

For a list of vehicle specific racks click on the name of the manufacturer.

JEEP - TOYOTA - LAND ROVER - LEXUS -

NISSAN - MERCEDES - MITSUBISHI

   

We also offer a full range of Front Runner roof rack accessories

 

 

hilift

HI-LIFT JACK MOUNTING BRACKET
Made of heavy gauge CR12 stainless steel, and powder coated, the mount is an ideal solution for keeping your lift up and away from the elements.

Black powder coated steel 2 piece bracket. Lockable. It consists of two (2) main pieces, one to manage the handle and one to manage the base. Secures to side rail of the Front Runner Slimline Roof Rack or can be adapted to other racks or installations.

Cost: $62.00

 

 

shovel

FRONT RUNNER SHOVEL MOUNTING BRACKETS 
Powder coated stainless steel (3CR12).
Allows small shovel to be mounted on the side of the roof rack. Shovel can be secured with a padlock.
Can accommodate many shovel sizes with D shaped handle.
Bolts to side rail of Front Runner Slimline Roof Rack.

Cost: $55.00

 

 

axe

FRONT RUNNER AXE MOUNTING BRACKET 
The Front Runner Axe Mounting Bracket is a safe and secure option for traveling with your long handled axe.
Bolts to the side rail of a Front Runner Slimline Roof Rack or can be adapted to other racks and applications.
Axe head is protected in lockable steel cage and can be positioned blade up or down.
Powder coated stainless steel (3CR12).
Axe can be secured with a padlock.
Can accommodate most axe sizes.

Cost: $66.60

   
tirestrap

FRONT RUNNER SPARE TIRE MOUNT UTILITY STEPS
Attaches to rear mounted spare wheel using heavy duty black ratchet strap provided. Allows effortless access to Roof Racks. Black powder coated stainless steel frame with aluminum non-slip tread plates.
No drilling, no tools -- just wrap, ratchet tight, and climb.

Cost: $143.00

 
ext

OUTFITTERS EXTENSION STRAP FOR UTILITY STEP
You need these to properly secure the Front Runner Utility Step with Oversized Tires 33” to 35". 

Cost: $5.00

   
canoe

FRONT RUNNER KAYAK/CANOE HOLDER SET
Two (2) pairs of steel braces with padded canvas wraparounds. The support braces can be slid and locked off anywhere in the t-slots to accommodate many small boat sizes. Black powder coated steel brackets.

Cost: $70.00

   
bike

FRONT RUNNER BICYCLE CARRYING MOUNT 
This upright 2 piece carrier includes rear tire channel with a velcro strap and a twist locking brace for front fork. Fits almost all size bicycles. Can be mounted anywhere on the rack using the bolt through slat system. Black Powder coated stainless steel.

Cost: $75.00

   
light

RACK SPOT LIGHT/ANTENNA MOUNTING BRACKETS 
Can be positioned anywhere on the front of the Roof Rack.
The Dual mounting points drastically reduce vibration extending the life of your mounted electrical accessories.
Sold as a pair. Black, powder coated stainless steel.

Cost: $39.00

   
skis

FRONT RUNNER SKI/SNOWBOARD/FISHING ROD HOLDER 16.75” inch wide opening. Strong and lockable Stainless Steel with soft rubber jaws. Ideal solution for traveling with fishing rods or skis etc. The rubber linings of the clamps will keep your gear safe on even the roughest roads. Sold as a pairs.

Cost: $110.00

   
spare

FRONT RUNNER SPARE WHEEL CLAMP
The Tire Carrier mounts across 2 slats and can handle most any size tire and wheel configuration. It tightens down to the back side of the wheel to protect your wheel finish, and can accommodate even the deepest offsets. The carrier is also lockable. Can be bolted to other makes of roof racks with some hole drilling.  

Cost: $69.00

   
water

RACK MOUNT WATER TANK-40L (10.57 Gallons)
Lockable Black powder coated 3 CR12 stainless steel tray. Adjustable tension clasp for a rattle free grip. • 10.57 Gallon (40 liter) tank made from food grade polyethylene and is BPA free. Filler at top, drain/hose attachment at bottom. Filler cap safety line. Never loose the cap!

Cost: $245.00

   
bottle

FRONT RUNNER RACK MOUNT BOTTLE OPENER
Can be installed anywhere on the outer lip of the Front Runner Slimline Roof Rack or vehicle.

Cost: $9.50

   
branch

FRONT RUNNER BRANCH DEFLECTORS
Supplied with eye bolts to secure on roof rack and turn buckles to fit on bull bar.

Cost: $109.00

   
tiedown

FRONT RUNNER TIE DOWN RINGS
These easy to use tie down rings quickly and easily mount in to the t-slots on the Front Runner Slimline Roof Rack. Slide these around anywhere on the rack for an endless supply of tie down points. Perfect for use the bungees or any hook style tie down strap.

Cost: $11.00  

   
rackstor

FRONT RUNNER UNDER RACK STORAGE SLIDES
Your gear can be mounted and stored underneath the rack using these storage slides. Stow a table, sand ladders, or any flat object. The slides come with a locking mechanism that attaches to the end of the Front Runner Stainless Steel Camp Table so that the table can be easily locked on to the rack.

Cost: $58.00

   
  BAJA RACK


rttracksm



The Baja Racks are extremely well designed and manufactured, they are welded, powder coated black, aerodynamic, and come with a front wind deflector.

Baja Racks can be fitted to vehicles and trailers with factory racks and crossbars, or vehicles using the Yakima® or Thule® mounting solutions. The uprights and crossbars are not included in the Baja Rack package.

 
 

Roof Tent & Cargo Racks

bajasidesm

Roof Tent Rack. We are happy to present the latest innovation from Baja Racks that is the perfect solution for combining cargo and roof top tents on long wheel base vehicles.

This nicely designed and well built powder coated rack measures 48" wide x 84" long.

   
tentracksm

The flat area for tent mounting is 48" wide x 58.25 long. Perfect for mounting a 1200 or 1400, allowing your tent to open to the side or rear of the vehicle.

A 1600 could be mounted opening to the side leaving about 6-8" hanging off the rear of the rack.

The total weight is 52 lbs.

It is recommended to mount the rack to 3 or more Thule, Yakima or equivalent cross bars.

The rack comes in 3 parts and ships in 2 separate boxes. Some minor assembly is required.

Cost: $565.00

 

   
bajarack

Toyota FJ Cruiser (2007-2010) rack for roof top tents (one piece) , installs directly to the factory mounts (No Drilling), all mounting hardware(stainless steel) is included. 

48" W x 82" L x 6" H Weight 52lbs.

Cost: $625.00

   
baja8060

Toyota Land Cruiser 80 & 60 Series. Full size one piece rack, installs to rain gutter of vehicle with 4 mounts per side for maximum support.

Material: Frame: 1” (25.4mm) and 1/2’”(12.7mm) Steel tubing
Top Wind Deflector: .062” (1.57mm) 5050-H32 Aluminum
Bottom Wind deflector: .062” (1.57mm) 5050-H32 Aluminum Finish: Zinc primer with black powder coating
Rack weight: 52Lb (23.58Kg)
Weight Capacity: 600Lb (272 kg)
Measurements: 48” Wide x 82” Long x 6” Tall
(1219.2mm x 12082.8mm x 152.4mm)
Mounting method: Rain gutter mounts (8 total) 

Cost: $595.00

   
   
bajahorizon

The Mule is 48" long X 39" wide X 7.25" tall, and includes the mounting hardware,and stretch net.

Cost: $295.00

 

 

   
bajarack2

The Mega Mule is 64" long X 48" wide X 7.25" tall, and includes the mounting hardware.

Cost: $380.00

   
  For more information on Baja Racks click here.