BajaRack roof racks are well designed and crafted equipment made in North America. The selection of racks and baskets are both vehicle specific and universal. 

Vehicle Specific Racks: We stock Bajaracks for the following vehicles: For a list of vehicle specific racks click on the name of the manufacturer.

 Toyota FJ Cruiser (2007-2012) Rack for Roof Top Tents (one piece) : Installs directly to the factory mounts (No Drilling), all mounting hardware(stainless steel) is included. This rack has a flat area for a Roof Top Tent and a small basket for essential gear and fuel in the front. Four brackets are included to secure the tent to the rack this is the ultimate rack for the hardcore explorer.

The outside frame is made of 1 inch carbon steel tubing and the floor with ฝ inch spaced mesh to avoid small items from falling. It also comes with an aluminum wind deflector that has a clear coating over the already resistant powder coating finish. We do this because we know the beating the rack will get out there.

The installation is done directly to the factory mounts on the vehicle; all mounting hardware is stainless steel. The design follows the contours of the FJ roof while keeping the bottom level. Total height of the vehicle (stock) with the rack installed is 78.25".

• Frame: 1” (25.4mm) and 1/2’”(12.7mm) Steel tubing
• Top Wind Deflector: .062” (1.57mm) 5050-H32 Aluminum Bottom Wind deflector: .062” (1.57mm) 5050-H32 Aluminum
• Finish: Zinc primer with black powder coating
• Rack weight: 52Lb (23.58Kg)
• Weight Capacity: 300Lb (136 kg)
• Measurements: 48”(1219.2mm) Wide x 82” (2082.8 mm) Long x 6” (152.4mm) tall Mounting method: Roof mounts (6 total)

Cost: $715.00

Toyota FJ Cruiser Utility (2007-2012) This rack is completely flat with reinforced tubing to carry loads of construction material or an oversize Roof Top Tent. The rack measures 51" wide x 91" long, adds 4.5" to the height of the vehicle (less than the stock rack). It comes standard with 6 tie down loops and 4 brackets in the front and 2 in the back for lights. Includes the aluminum front wind deflector and all installation.

Cost: $725.00 

Toyota FJ Cruiser Low Profile rack. (2007-2012) Half Metallic Mesh Floor. Measurements 48" wide x 82" long x 5" tall (This rack comes as one piece). Finish Zinc.

Cost: $825.00 

Toyota FJ Cruiser Standard Rack.(2007-2012) Standard one piece rack. The outside frame is made of 1 inch carbon steel tubing and the floor with ฝinch spaced mesh to avoid small items from falling. It also comes with an aluminum wind deflector that has a clear coating over the already resistant powder coating finish. We do this because we know the beating the rack will get out there. The installation is done directly to the factory mounts on the vehicle; all mounting hardware is stainless steel. The design follows the contours of the FJ roof while keeping the bottom level. Total height of the vehicle (stock) with the rack installed is 78.25".

Measurements 48" wide x 82" long x 6" tall (This rack comes as one piece).

Cost: $750.00 

Toyota FJ Cruiser Basket.(2007-2010) The basket installs inside the stock rack. Adds functionality and versatility to the factory rack without adding extra height to the vehicle. This rack was specifically design to follow the curves of the factory rack, with its clamping system installation is fast and easy.

Fits inside of stock rack, measurements (38" in front and 36" in the back width) x 48" long x 5.25" tall

Cost: $430.00 

80 SERIES

 Toyota Land Cruiser 80 & 60 Series. Full size one piece rack, installs to rain gutter of vehicle with 4 mounts per side for maximum support.

• Material: Frame: 1” (25.4mm) and 1/2’”(12.7mm) Steel tubing
• Top Wind Deflector: .062” (1.57mm) 5050-H32 Aluminum Bottom Wind deflector: .062” (1.57mm) 5050-H32 Aluminum
• Finish: Zinc primer with black powder coating
• Rack weight: 52Lb (23.58Kg)
• Weight Capacity: 600Lb (272 kg)
• Measurements: 48” Wide x 82” Long x 6” Tall (1219.2mm x 12082.8mm x 152.4mm) Mounting method: Rain gutter mounts (8 total)

Cost: $825.00

Toyota Land Cruiser 80 Series Short Rack, 1990-1997 Measurements 64" long x 48" wide x 6" tall (This rack comes in one piece). Finish Zinc primer with black powder coating. All mounting brackets included.

Cost $530.00

Toyota Land Cruiser 80 Series Flat Rack, (utility). Measurements 51" wide x 91" long x 1.5" tall (This rack comes as one piece). Finish Zinc primer with black powder coating. All mounting brackets included.

Cost: $775.00

Toyota Land Cruiser 80 Series Rack for roof top tents. Measurements 82" long x 48" wide, flat area is 56.75" long x 48" wide (This rack comes in one piece). Finish Zinc primer with black powder coating. All mounting brackets included.

Cost: $770.00 

Land Cruiser 100 Series Expedition Rack. (1998-2007) for roof top tents. Measurements 51" wide x 82" long, flat area is 48" wide x 56.75" long (One piece). Finish Zinc primer with black powder coating. All mounting brackets included.

Cost: $730.00 

200 SERIES

Land Cruiser 200 Series Full Roof Rack. measurements 82" long x 51" wide x 5" tall (This rack comes in one piece). Finish Zinc primer with black powder coating. All mounting brackets included.

Cost: $850.00 

Land Cruiser 200 Series Expedition Roof Rack. For roof top tents. Measurements 51" wide x 82"long, flat area is 48" wide x 56.75" long (One piece). Finish Zinc primer with black powder coating. All mounting brackets included.

Cost: $800.00 

TACOMA

Toyota Tacoma PreRunner Sport Rack (mounts to factory crossbars). Measurements 57" long x 40" wide x 6" tall (This rack comes as one piece). Finish Zinc primer with black powder coating. All mounting brackets included.

Cost: $450.00
Special order 3 -4 weeks. 

4 RUNNER

Toyota 4Runner Gen 5 Standard Rack. (2010-2012) Designed around the four factory mounting positions on the roof of the vehicle without obstructing the operation of the sunroof, there is a cutoff on the floor of the rack to avoid interference with the roof antenna. No drilling required.

• Frame: 1” (25.4mm), 1/2'”(12.7mm) and 3/4"(19.05mm) Steel tubing.
• Top Wind Deflector: .062” (1.57mm) 5050-H32 Aluminum.
• Finish: Zinc primer with black powder coating
• Rack weight: 65 Lb (29.48Kg)
• Weight Capacity: 300Lb (136 kg)
• Measurements: 46” (1,168.40 mm) Wide x 62” (1,574.80 mm) Long x 5” (127 mm) tall Mounting method: Roof Mounts (4 total)

Cost: $695.00

Toyota 4Runner Gen 5 Expedition Rack. (2010-2012) For Roof Top Tents Designed around the four factory mounting positions on the roof of the vehicle without obstructing the operation of the sunroof, there is a cutoff on the floor of the rack to avoid interference with the roof antenna. No drilling required

Cost: $670.00 

Toyota 4Runner Gen 4 Standard Rack. (2003 thru 2009) Measurements 74" long x 47" wide x 6" tall (This rack comes as one piece). Finish Zinc primer with black powder coating. All mounting brackets included.

• Frame: 1” (25.4mm) and 1/2’’(12.7mm) and 3/4"(19.05mm) Steel tubing
• Top Wind Deflector: .062” (1.57mm) 5050-H32 Aluminum
• Finish: Zinc primer with black powder coating
• Rack weight: 65 Lb (29.48Kg)
• Weight Capacity: 300Lb (136 kg)
• Measurements:Width x 47” (1193.8 mm), Long x 74”(1879.6 mm), High 6”(152.39 mm).
• Mounting method: Roof Mounts (4 total)

Cost: $655.00  

Land Rover Discovery I Standard Rack. (1994-1998) The side front rails don't need to be removed.

• Frame:1” (25.4mm), พ” (19.05mm) and 1/2’”(12.7mm) Steel tubing.
• Wind Deflector:.062” (1.57mm), 5050-H32 Aluminum
• Finish: Zinc primer with black powder coating.
• Rack weight: 100 Lb (45.5Kg).
• Weight Capacity: 600Lb (272 kg)
• Measurements outside Frame: 59”(1498.6mm) Wide x 92” (2336.8 mm) Long x 5” (127mm) tall
• Mounting method: Rain gutter mounts (8 total).

Cost: $965.00 

Land Rover Discovery I Expedition. (1999-2004) This version has a flat area for the Roof Top Tent and a basket in the front for extra gear and fuel; this is the perfect rack for the hardcore overlander. The side front rails don't need to be removed. Outside frame measurements 92" long x 59" wide. Flat area for Roof Top Tent measures 45" long x 53" wide (This rack comes as one piece). Finish Zinc primer black powder coating. All mounting brackets (8) included.

Cost: $910.00 

Land Rover Discovery II Standard Rack. (1999-2004) The side front rails don't need to be removed.

• Frame:1” (25.4mm), พ” (19.05mm) and 1/2’”(12.7mm) Steel tubing.
• Wind Deflector:.062” (1.57mm), 5050-H32 Aluminum
• Finish: Zinc primer with black powder coating.
• Rack weight: 100 Lb (45.5Kg).
• Weight Capacity:600Lb (272 kg)
• Measurements outside Frame: 59”(1498.6mm) Wide x 97” (2463.8 mm) Long x 5” (127mm) tall Mounting method:Rain gutter mounts (8 total).

Cost: $965.00 

Land Rover Discovery II Expedition Rack. (1999-2004) The side front rails don't need to be removed. The Expedition version of this rack has a flat area for the Roof Top Tent and a basket in the front for extra gear and fuel; this is the perfect rack for the hardcore overlander. Outside frame measurements 97" long x 59" wide. Flat area for Roof Top Tent measures 49" long x 59" wide (One piece rack). Outside frame measurements 97" long x 59" wide. Flat area for Roof Top Tent measures 49" long x 59" wide (One piece rack).

Cost: $910.00 

Land Rover LR3 Standard Rack. (2005-2009) Measurements 92" long x 50" wide x 5" tall (This rack comes as one piece). Finish Zinc primer with black powder coating. All mounting brackets (6) included.

Cost: $890.00 

Land Rover LR3 Expedition Rack. (2005-2009) The Expedition version of this Rack has a flat area for the Roof Top Tent. Measurements 92" long x 50" wide. Flat area for Roof Top Tent measures 56" long x 50" wide(This rack comes as one piece). Finish Zinc primer with black powder coating. All mounting brackets (6) included.

Cost: $835.00 

Land Rover LR4 Standard Rack. (2010-2011) Rack measurements 92" long x 50" wide x 5" tall (This rack comes as one piece). Finish Zinc primer with black powder coating. All mounting brackets (6) included.

Cost: $890.00 

Land Rover LR4 Expedition Rack. (2010-2011) The Expedition version of this Rack has a flat area for the Roof Top Tent. Measurements 92" long x 50" wide. Flat area for Roof Top Tent measures 56" long x 50" wide(This rack comes as one piece). Finish Zinc primer with black powder coating. All mounting brackets (6) included.

Cost: $835.00 

RANGE ROVER

Rover Range Rover Classic full roof line rack. (1987-1995) Measurements 82" long x 56" wide x 6" tall (This rack comes in one piece). Finish Zinc primer with black powder coating. All mounting brackets (8) included.

Cost: $825.00 

Rover Range Rover Classic Expedition rack. (1987-1995) The Expedition version of this Rack has a flat area for the Roof Top Tent. Land Rover Range Rover Classic Rack for roof top tents, measurements 82" long x 56" wide, flat area is 56.75" long x 56" wide (This rack comes in one piece. Finish Zinc primer with black powder coating. All mounting brackets (8) included.

Cost: $780.00 

JEEP

Jeep JK 4 Door Standard Rack. (2007-2011) Measurements 52" wide x 90" long x 6" tall (This rack comes as one piece). Finish Zinc primer with black powder coating. All mounting brackets and supports included.

Cost: $980.00 

Jeep JK 4 Door Expedition Rack. (2007-2011) The Expedition version of this Rack has a flat area for the Roof Top Tent. Measurements 52" wide x 90" long, flat area is 52" wide x 60" long (This rack comes as one piece). Finish Zinc primer with black powder coating. All mounting brackets and supports included.

Cost: $935.00 

Jeep TJ 2 Door Standard Rack. (1997-2006) Measurements 51" wide x 63" long x 6" tall (This rack comes as one piece). Finish Zinc primer with black powder coating. All mounting brackets and supports included.

Cost: $875.00 

Jeep TJ 2 Door Expedition Rack. (1997-2006) The Expedition version of this Rack has a flat area for the Roof Top Tent. Measurements 51" wide x 63" long, flat area is 51" wide x 60" long (This rack comes as one piece). Finish Zinc primer with black powder coating. All mounting brackets and supports included.

Cost: $820.00 

NISSAN

Nissan Xterra Gen 1 Standard Rack. (2000-2004) Outside frame measurements 84.5" long x 41" wide x 5" tall (This rack comes as one piece). Finish Zinc primer with blacmounting brackets included.

Cost: $750.00 

Nissan Xterra Gen 1 Expedition Rack. (2000-2004) The Expedition version of this Rack has a flat area for the Roof Top Tent. Outside frame measurements 84.5" long x 41" wide x 5" tall, flat area is 41" wide x 52" long (This rack comes as one piece). Finish Zinc primer with black powder coating. All mounting brackets included.

Cost: $700.00 

Nissan Xterra Gen 2 Standard Rack. (2005-2011) Outside frame measurements 87.5" long x 41" wide x 5" tall (This rack comes as one piece). Finish Zinc primer with black powder coating. All mounting brackets included.

Cost: $775.00

Nissan Xterra Gen 2 Expedition Rack. (2005-2011) The Expedition version of this Rack has a flat area for the Roof Top Tent. Outside frame measurements 87.5" long x 41" wide x 5" tall, flat area is 41" wide x 52" long (This rack comes as one piece). Finish Zinc primer with black powder coating. All mounting brackets included.

Cost: $725.00 

HUMMER

Hummer H3 Standard Rack. Measurements 51" wide x 91" long x 6" tall (one piece). Finish Zinc primer with black powder coating. All mounting brackets included.

Cost: $800.00 

Hummer H3 Expedition Rack. The Expedition version of this Rack has a flat area for the Roof Top Tent. Measurements 51" wide x 91" long, flat area is 51" wide x 57" long (This rack comes as one piece). Finish Zinc primer with black powder coating. All mounting brackets included.

Cost: $750.00