ROOF TENT: ACCESSORIES |
| |
|
| |
|
| |
|
|
| |
| |
Shower Skirt |
 |
The shower skirt adds a small room underneath an open Series 3 tent and creates an enclosed area suitable for a changing room or shower enclosure. It attaches to the bottom of a Series 3 Roof-Top tent with aluminum female welt extrusions and gives you access to the back or side of your vehicle when the tent is so oriented.
The shower skirt made of the same rip-stop canvas as the tent.
|
| |
|
| |
2.0 Meter
Shower Skirt
The 2M (78.74") length is designed for vehicles with a tent base height up to 79".
Dimensions 1200 (EZA201) 48"L x 48"W x 79"H
Dimensions 1400 (EZA202) 48"L x 55"W x 79"H
Dimensions 1600 (EZA205) 48"L x 63"W x 79"H
Dimensions 1800 (EZA206) 48"L x 71"W x 79"H
Dimensions 2200 (EZA209) 48"L x 87"W x 79"H
Weight 13 - 18 lbs
Color Olive or Beige
Price for Series 1200 $551.00
Price for Series 1400 $551.00
Price for Series 1600 $576.00
Price for Series 1800 $602.00
|
| |
|
| |
2.2 Meter
Shower Skirt
The 2.2 Meter is for taller vehicles with a mounting height up to 86.6".
The dimensions for the 2.2 M shower shirts are identical to those for the 2.0 meter skirts with the exception of the length. Pricing is also the same.
2.2 Meter Shower Skirts are a non-stock item and need to be special ordered. |
| |
|
| |
Ladder Extension Foot |
 |
If you plan to mount you Eezi-Awn tent a considerable distance off the ground, you will need one of these extensions. The entire tent line includes a patented extension ladder that will perform to a height of 8’ from ground level. If you plan to mount the tent to fold out to the back or side of the vehicle any higher than this, you will need one of these foot extensions. It easily slides into the bottom of the ladder to provide the extra length necessary.
Cost: $56.00
|
| |
|
| |
Tent Mounting Assembly |
|
|
Install and remove your roof top tent easily with our mounting system. The hardware slides into the tents mounting extrusion and clamps to the roof rack cross bar.
The hardware consists of Two 1 7/8” x 1 3/8” x 10 gauge electroplated steel plates, two 1/4 x 20 x 1.75 carriage bolts, and 2 nylock nuts. You need two sets per roof rack cross bar.
Cost: $7.99
|
| |
|
|
| |
|
